Dimension Reverb

Dimension Reverb

The Soundblox 2 Dimension Reverb offers 12 distinct shades of reverb. Choose from 6 reflectively diverse room sounds, two plate and two spring reverbs, modulation reverb, and echo. The pedal features a compact and durable cast aluminum housing plus 2 user presets — each with a dedicated footswitch. The assignable “Option” knob makes it possible to adjust 9 different parameters: wet/dry mix, time (i.e. resonance), bass, treble, pre-delay, diffusion, output level, modulation rate, and modulation depth.

Connect the Dimension Reverb to Source Audio’s Neuro Hub and tap into its MIDI capabilities. Save up to 128 presets recallable via MIDI program change (PC) messages from an external MIDI foot controller. The Dimension also features a special “trails»dquo; mode (a.k.a. soft bypass), which allows your reverberations to ring to completion after the pedal has been bypassed.

The Dimension Reverb’s Multi-Funtion In jack is compatible with any of Source Audio’s expression controllers: the Reflex Universal Expression Controller, Dual Expression Pedal, and Hot Hand 3 Universal Wireless Effects Controller. Assign external expression control to any of the pedal’s knob parameters or incorporate Reverb Send mode, which enables on-the-fly control over the amount of dry signal being routed through the reverb chamber.

Dimension Reverb Interface

Roll your mouse over hot spots (+) on the panel controls and ports to learn about each one.

Soundblox 2 Dimension Reverb Top Panel

Selects the reverb type to be used.

Adjusts the duration of the reverb.

Balances the wet and dry signals.

Selects which paramater will be controlled by the OPTION knob.

Selects the external controller type to be used.

Adjusts parameter selected by the OPTION SELECT button.

Controls the high frequency damping on the reverb.

Enables/disables a preset depending on the selected footswitch. Press and hold to save an edited preset.

Enables/disables a preset depending on the selected footswitch. Press and hold to save an edited preset.

I/O Ports

Roll your mouse over hot spots (+) on the ports to learn about each one.

Soundblox 2 Dimension Reverb I/O Ports

Connect a hot hand receiver or expression pedal via a 4 pole ⅛” sensor cable.

Connect your instrument here using a standard MONO ¼” cable.

Connect this to your amp, pedal, or other audio device.

Connect this to other Soundblox pedals via a hot hand Daisy Chain cable.

Connect a 9V DC power supply here.

Soundblox 2 Dimension Reverb Features & Specifications

  • Diverse Sound Palette — Featuring 6 different room sounds, 2 plate reverbs, 2 spring reverbs, modulation reverb, and echo.
  • Compact, cast aluminum housing.
  • 2 User Presets easily recalled via two footswitches.
  • Universal Bypass — selectable buffered or true bypass.
  • 9 Adjustable Parameters — adjust the wet/dry mix, time (i.e. resonance), treble, bass, pre-delay, diffusion, output level, modulation rate, and modulation depth.
  • Multi-function In — use the Source Audio Dual Expression Pedal or the Hot Hand Motion Sensor for on-the-fly control over any of the 9 adjustable parameters.
  • MIDI Capable — the Multi-function In jack also allows MIDI access to presets and parameters.
  • State-of-the-art DSP — Our proprietary 56-bit Digital Signal Processor, the SA601, and crystal clear 24-bit converters.
  • 9V DC power supply included
  • Dimensions: L: 4.5 in./11.4cm x W: 4.5 in./11.4cm x H: 2.25 in./5.7cm (including knobs)